 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SG2010 GENERAL DESCRIPTION The SG2010 low-power, low-dropout, CMOS linear voltage regulator operates from 2.5V to 5.5V input and delivers up to 150mA. It is the perfect choice for low voltage, low power applications. An ultra low ground current (100A at 150mA output ) makes this part attractive for battery operated power systems. The SG2010 series also offers ultra low dropout voltage (105mV at 150mA output) to prolong battery life in portable electronics. The output voltage is preset to voltages in the range of 1.5V to 5.0V. Other features include foldback current limit and thermal shut-down protection. SG2010 comes in 3-pin SOT23 package and 3-pin SOT89 package. 150mA, Low Power, Low Dropout, Linear Regulators FEATURES - Ultra-Low Dropout Voltage: 105mV at 150mA output - Low 80A No-Load Supply Current - Low 100A Operating Supply Current - at 150mA Output Thermal-Overload Protection Output Current Limit Preset Output Voltages (1.8% Accuracy) Output Voltage: Available in Fixed Outputs of 1.5V, 1.8V, 2.5V, 2.8V, 3.0V, and 3.3V PIN CONFIGURATIONSTOP VIEW SG2010 SG2010 GND APPLICATIONS Cellular Telephones Digital Cameras MP3MP4 USB 2.0 Modems PC Cameras Hand-Held Instruments Electronic Dictionarys Portable/Battery-Powered Equipment GND 1 3 IN 1 OUT 2 GND 3 IN OUT 2 SOT23-3 SOT89-3 TYPICAL OPERATION CIRCUIT INPUT IN CIN 1F GND OUT OUTPUT COUT 1F Shengbang Microelectronics Co, Ltd Tel: 86/451/84348461 www.sg-micro.com REV. B ORDERING INFORMATION MODEL SG2010-1.5 SG2010-1.8 SG2010-2.5 SG2010-2.8 SG2010-3.0 SG2010-3.3 VOUT(V) 1.5V 1.8V 2.5V 2.8V 3.0V 3.3V PINPACKAGE SOT23-3 SOT89-3 SOT23-3 SOT89-3 SOT23-3 SOT89-3 SOT23-3 SOT89-3 SOT23-3 SOT89-3 SOT23-3 SOT89-3 SPECIFIED TEMPERATURE RANGE - 40C to +125C - 40C to +125C - 40C to +125C - 40C to +125C - 40C to +125C - 40C to +125C ORDERING NUMBER SG2010-1.5XN3/TR SG2010-1.5XK3/TR SG2010-1.8XN3/TR SG2010-1.8XK3/TR SG2010-2.5XN3/TR SG2010-2.5XK3/TR SG2010-2.8XN3/TR SG2010-2.8XK3/TR SG2010-3.0XN3/TR SG2010-3.0XK3/TR SG2010-3.3XN3/TR SG2010-3.3XK3/TR PACKAGE MARKING XA15 SG2010-1.5XK3 XA18 SG2010-1.8XK3 XA25 SG2010-2.5XK3 XA28 SG2010-2.8XK3 XA30 SG2010-3.0XK3 XA33 SG2011-3.3XK3 PACKAGE OPTION Tape and Reel, 3000 Tape and Reel, 1000 Tape and Reel, 3000 Tape and Reel, 1000 Tape and Reel, 3000 Tape and Reel, 1000 Tape and Reel, 3000 Tape and Reel, 1000 Tape and Reel, 3000 Tape and Reel, 1000 Tape and Reel, 3000 Tape and Reel, 1000 ABSOLUTE MAXIMUM RATINGS IN to GND.....................................................................- 0.3V to +6V Output Short-Circuit Duration............................................Infinite OUT to GND...................................................- 0.3V to (VIN + 0.3V) Power Dissipation, PD @ TA = 25 SOT23-3 .....................................................................................0.4W SOT89-3 ................................................................................0.571W Package Thermal Resistance SOT23-3, JA....................................................................... 250/W SOT89-3, JA.........................................................................175C/W Operating Temperature Range............................- 40C to +125C Junction Temperature...........................................................+150C Storage Temperature.............................................- 65C to +150C Lead Temperature (soldering, 10s).......................................260C ESD Susceptibility HBM..........................................................................................7000V MM..............................................................................................400V Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. PIN DESCRIPTION NAME IN GND OUT FUNCTION Regulator Input. Supply voltage can range from 2.5V to 5.5V. Ground. Regulator Output. SG2010 ELECTRICAL CHARACTERISTICS (VIN = VOUT (NOMINAL) + 0.5V or 2.5V (whichever is greater), TA = - 40C to +125C, unless otherwise noted. Typical values are at TA = + 25C.) PARAMETER Input Voltage SYMBOL VIN IOUT = 0.1mA, TA = +25C IOUT = 0.1mA to 150mA, Output Voltage Accuracy TA = 0C to +70C IOUT = 0.1mA to 150mA, TA = - 40C to +125C Output Current Current Limit Ground Pin Current Dropout Voltage(Note1) Line Regulation Load Regulation Output Voltage Noise Power Supply Rejection Rate THERMAL PROTECTION Thermal Shutdown Temperature Thermal Shutdown Hysteresis TSHDN TSHDN 160 15 VLNR VLDR ILIM IQ No load IOUT = 150mA IOUT = 1mA IOUT = 150mA VIN = 2.5V or (VOUT + 0.1V) to 5.5V, IOUT = 1mA IOUT = 0.1mA to 500mA, COUT = 1F f = 10Hz to 100KHz, COUT = 10F ILOAD = 50mA, COUT = 1F f = 100Hz, f = 1KHz, 150 160 600 80 100 0.8 105 0.004 0.0005 120 74 54 170 0.15 0.002 130 CONDITIONS MIN 2.5 -1.8 TYP MAX 5.5 1.8 2.2 2.6 mA mA A mV %/V %/mA VRMS dB dB % UNITS V en PSRR Specifications subject to change without notice. Note 1: The dropout voltage is defined as VIN - VOUT, when VOUT is 100mV below the value of VOUT for VIN = VOUT + 0.5V. (Only applicable for VOUT = +2.5V to +5.0V) SG2010 TYPICAL OPERATING CHARACTERISTICS VIN = VOUT(NOMINAL) + 0.5V or 2.5V (whichever is greater), CIN = 1F, COUT = 1F, TA = +25, unless otherwise noted. Output Voltage vs.Load Current 2.6 100 80 60 No Load 40 20 VOUT = 2.5V 0 Iload = 50mA Ground Pin Current vs.Input Voltage Output Voltage(V) 2.55 2.5 2.45 VOUT = 2.5V 2.4 0 50 100 Load Current(mA) 150 Ground Pin Current(A) 0 1 2 3 4 Input Voltage(V) 5 6 Ground Pin Current vs.Input Voltage 200 Output Voltage vs.Input Voltage 6 No Load 5 Ground Pin Current(A) Output Voltage(V) 150 Iload = 50mA 4 VOUT = 3.3V 3 2 VOUT = 2.5V 1 100 50 No Load VOUT = 3.3V 0 0 1 2 3 4 Input Voltage(V) 5 6 0 0 1 2 3 4 Input Voltage(V) 5 6 Output Voltage vs.Temperature 2.6 ILOAD = 50mA Output Voltage(V) 2.55 Dropout Voltage(mV) Dropout Voltage vs.Load Current 180 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 VOUT = 2.5V 120 140 160 TA = +125 TA = +85 TA = +25 TA = -40 2.5 2.45 VOUT = 2.5V 2.4 -40 -20 0 20 40 60 80 Temperature() 100 120 140 Load Current(mA) SG2010 TYPICAL OPERATING CHARACTERISTICS VIN = VOUT(NOMINAL) + 0.5V or 2.5V (whichever is greater), CIN = 1F, COUT = 1F, TA = +25, unless otherwise noted. Region of Stable COUT ESR vs.Load Current 100 Current limit vs.Temperature 1200 1100 Current limit(mA) 1000 VOUT = 2.5V 10 COUT ESR() COUT = 10F 900 800 700 600 500 400 300 -40 -20 0 20 40 60 80 Temperature() 100 120 140 1 Stable Region 0.1 COUT = 1F 0.02 0.01 0 30 60 90 Load Current(mA) 120 150 Line-Transient Response 4.5V 3.5V ILOAD = 50mA 3.1V 3V 2.9V VOUT = 3V 100S/div VOUT 50mA 0mA Load-Transient Response VIN = VOUT + 0.5V VIN ILOAD = 0mA to 50mA 3.05V 3V 2.95V CIN = 1F VOUT ILOAD VOUT = 3V 40S/div Load-Transient Response Near Dropout 3.05V 3V 2.95V VOUT = 3V VOUT Power-Supply Rejection Ratio vs.Frequency 80 70 60 PSRR(dB) 50 40 30 20 10 0 0.01 COUT = 1F COUT = 10F ILOAD = 50mA 50mA 0mA CIN = 1F VIN = VOUT + 0.1V ILOAD = 0mA to 50mA 40S/div ILOAD 0.1 1 10 100 1000 Frequency(kHz) SG2010 Application Notes When LDO is used in handheld products, Attention must be paid to voltage spike which would damage SG2010. In such applications, voltage spike will be generated at changer interface and VBUS pin of USB interface when changer adapters and USB equipments are hot-inserted. Besides this, handheld products will be tested on the production line on the condition of no battery. Test Engineer will apply power from the connector pin which connects with positive pole of the battery. When external power supply is turned on suddenly, the voltage spike will be generated at the battery connector. The voltage spike will be very high, it always exceeds the absolute maximum input voltage (6.0V) of LDO. In order to get robust design. Design Engineer needs to clear up this voltage spike. Zener diode is a cheap and effective solution to eliminate such voltage spike. For example, BZM55B5V6 is a 5.6V small package Zener diode which can be used to remove voltage spike in cell phone design. The schematic is shown in below: Vcc Input BZM55B5V6 1uF C1 IN SG2010 GND VOUT C2 4.7uF VOUT SG2010 PACKAGE OUTLINE DIMENSIONS SOT23-3 D b L 0 0.20 Symbol A A1 Dimensions In Millimeters Min 1.050 0.000 1.050 0.300 0.100 2.820 1.500 2.650 1.800 0.300 0 Dimensions In Inches Min 0.041 0.000 0.041 0.012 0.004 0.111 0.059 0.104 0.071 0.012 0 Max 1.250 0.100 1.150 0.400 0.200 3.020 1.700 2.950 2.000 0.600 8 Max 0.049 0.004 0.045 0.016 0.008 0.119 0.067 0.116 0.079 0.024 8 E1 A2 b c D E E e e1 A1 C L E1 e e1 L 0.950TYP 0.700REF 0.037TYP 0.028REF A2 A L1 SG2010 PACKAGE OUTLINE DIMENSIONS SOT89-3 D D1 A Symbol A b b1 c D D1 E E1 e e1 L Dimensions In Millimeters Min Max 1.400 1.600 0.320 0.520 0.360 0.560 0.350 0.440 4.400 4.600 1.400 1.800 2.300 2.600 3.940 4.250 1.500TYP 2.900 3.100 0.900 1.100 Dimensions In Inches Min Max 0.055 0.063 0.013 0.020 0.014 0.022 0.014 0.017 0.173 0.181 0.055 0.071 0.091 0.102 0.155 0.167 0.060TYP 0.114 0.122 0.035 0.043 E1 L b e1 e c E SG2010 REVISION HISTORY Location 9/05-- Data Sheet changed from preliminary to REV. A 12/06-- Data Sheet changed from REV. A to REV. B Changed to ABSOLUTE MAXIMUM RATINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Added Application Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Page Shengbang Microelectronics Co, Ltd Unit 3, ChuangYe Plaza No.5, TaiHu Northern Street, YingBin Road Centralized Industrial Park Harbin Development Zone Harbin, HeiLongJiang 150078 P.R. China Tel.: 86-451-84348461 Fax: 86-451-84308461 www.sg-micro.com SG2010 |
Price & Availability of SG2010-25
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |